2D Image / Logo to 3D STL Converter
Drop a PNG, JPG, or SVG logo here to extrude it into a 3D printable .STL solid
Models: 3MF, OBJ, STL, GLTF, GLB · Images: PNG, JPG, WEBP, SVG
⚠️ Laser Safety: always wear certified protective goggles (OD6+), use fume extraction, and never cut or engrave PVC, vinyl, or chlorinated faux leather (releases toxic and corrosive chlorine gas).
Vector & Color Settings
Keyring Loop
Customize parameters below
Drop Back image here
Images: PNG, JPG, WEBP, SVG
Browse files💡 The Back is embedded in the bottom layers (Z=0), the middle Core blocks light bleed-through, and the Front is printed on the top layers.
💡 Printing tip: export to STL and print with White PLA filament (100% infill / 99 walls) to see the photo appear when backlit.
🛒 Calibrated to 0.01mm on official Euro coins. With the pull-tab style you can unlock the cart chain and pull your token right back out!
☕ Your logo is cut through in negative: place it over your cup or cake and dust with cocoa or powdered sugar!
⚙️ Vertical gravity-lock slide rail (slides in from bottom to top) and reinforced 16-click joint.
What are you converting?
Each color gets its own Z height (individually editable): ideal for 3D embossed details or layer-based filament swaps.
Result Preview:
How to Print Multi-Color Logos on Any Single-Extruder 3D Printer Using Stepped-Relief STL Files
You do not need an expensive multi-material unit (AMS or MMU) to 3D print crisp multi-color signs, badges, and keychains. By enabling Custom thickness per color (3D Relief) in Arch_ConvertMe, every color detected in your PNG, JPG, WEBP, or SVG logo is extruded to a distinct Z height in millimeters—allowing you to schedule simple Pause / Filament Change (M600) commands at specific layer heights in any slicer.
Step-by-Step Layer Swap Workflow with Stepped STL Models
Suppose you upload a 3-color emblem (Black background, White shield, Red lettering) with a 3.0 mm base thickness and a 0.6 mm relief step:
- Color 1 (Base) extrudes from Z = 0.0 mm to 3.0 mm;
- Color 2 (Mid layer) rises to Z = 3.6 mm;
- Color 3 (Top text) rises to Z = 4.2 mm;
- Slice the exported .STL in PrusaSlicer, Cura, OrcaSlicer, or Bambu Studio, drag the vertical layer slider to 3.20 mm and 3.80 mm, and click Add Color Change (M600). Your printer will pause automatically so you can swap spools!
Enable Continuous base (joins internal parts) so disconnected letters and islands sit on a unified backing plate.
Frequently Asked Questions (FAQ)
Can I customize the exact millimeter height of each color individually?
Yes! Once you check "Custom thickness per color", an interactive list appears where you can type the exact Z height in millimeters for every detected color.
How do I keep disconnected letters from printing as separate loose pieces?
Check "Continuous base (joins internal parts)" or set an "Outer joining border (mm)" of 1.5–2.0 mm to weld all islands onto a single backing plate.
Does this work with transparent PNGs and vector SVGs?
Yes, transparent PNG alpha channels are detected automatically, and SVG files are rasterized at high resolution for razor-sharp extrusion walls.
Related Tools & Guides:
Was Arch_ConvertMe helpful?
100% free, private, and ad-free service. If you like it, you can support development by buying me a coffee!