2D Image to Multicolor 3MF Converter
Drop a PNG, JPG, or SVG logo here to generate a multicolor .3MF 3D solid
Models: 3MF, OBJ, STL, GLTF, GLB · Images: PNG, JPG, WEBP, SVG
⚠️ Laser Safety: always wear certified protective goggles (OD6+), use fume extraction, and never cut or engrave PVC, vinyl, or chlorinated faux leather (releases toxic and corrosive chlorine gas).
Vector & Color Settings
Keyring Loop
Customize parameters below
Drop Back image here
Images: PNG, JPG, WEBP, SVG
Browse files💡 The Back is embedded in the bottom layers (Z=0), the middle Core blocks light bleed-through, and the Front is printed on the top layers.
💡 Printing tip: export to STL and print with White PLA filament (100% infill / 99 walls) to see the photo appear when backlit.
🛒 Calibrated to 0.01mm on official Euro coins. With the pull-tab style you can unlock the cart chain and pull your token right back out!
☕ Your logo is cut through in negative: place it over your cup or cake and dust with cocoa or powdered sugar!
⚙️ Vertical gravity-lock slide rail (slides in from bottom to top) and reinforced 16-click joint.
What are you converting?
Each color gets its own Z height (individually editable): ideal for 3D embossed details or layer-based filament swaps.
Result Preview:
Technical Guide: Convert 2D Logos to Multicolor .3MF for Bambu Lab AMS & OrcaSlicer
Unlike legacy STL files that store only a single uncolored mesh, the .3MF (3D Manufacturing Format) container packs multiple distinct, pre-colored 3D volumes inside a single assembly. Arch_ConvertMe vectorizes any PNG, JPG, WEBP, or SVG image and extrudes each detected color into a separate watertight mesh volume with embedded RGB metadata—ready for instant AMS slot mapping in Bambu Studio, OrcaSlicer, and PrusaSlicer without touching CAD software.
Cut AMS Filament Purge Waste by 85% with the Solid Monolithic Base
Printing a 4mm-thick multicolor emblem with colors running through all 20 layers triggers dozens of nozzle purges ("AMS poop") and hours of wasted print time. When you enable AMS filament saver (colors only on top layers) in Arch_ConvertMe:
- The engine unifies the entire silhouette into a 1-color Solid Monolithic Base for the structural body (e.g., the first 3.40 mm), preventing weak seams or internal slicer gaps;
- Multicolor volumes are restricted to the final 3 layers (0.60 mm at 0.20 mm layer height), slashing filament swaps from 60+ down to just 6–9 swaps;
- Combine this with 🔄 Flip face-down on build plate to print the colored layers directly against your textured or smooth PEI sheet at Z=0 for a commercial-grade flush surface.
Anti-Halo Edge Cleaning for Web Logos
Raster images often contain blurry anti-aliasing pixels along color boundaries. Our quantizer strips transitional halo pixels while preserving thin black outlines and sharp corners.
Frequently Asked Questions (FAQ)
How do I assign AMS filaments to the exported .3MF in Bambu Studio?
Import the .3MF file into Bambu Studio or OrcaSlicer and switch to the "Objects" tab: each color is listed as a named sub-part with its RGB color already applied, ready to map to your AMS slots.
How many colors can I extract into a single 3MF file?
You can extract from 1 up to 16 colors, supporting everything from a single 4-slot AMS Lite up to four chained AMS units.
Why should I enable "Flip face-down on build plate"?
Printing face-down places all color regions on the very first layer against the PEI build plate, eliminating visible top-layer extrusion lines and creating a perfectly flush face.
Related Tools & Guides:
Was Arch_ConvertMe helpful?
100% free, private, and ad-free service. If you like it, you can support development by buying me a coffee!