3D Cookie Cutter & Dough Stamp Generator

Drop your logo or drawing here to generate a 3D Cookie Cutter (.STL)

Models: 3MF, OBJ, STL, GLTF, GLB · Images: PNG, JPG, WEBP, SVG

How to Generate Custom 3D Printable Cookie Cutters with Recessed Dough Stamps

Designing custom cookie cutters in CAD from complex drawings requires tedious spline offsetting. Arch_ConvertMe's Cookie Cutter generator automatically computes three mechanical zones from any 2D image or silhouette: a sharp outer perimeter cutting blade, an ergonomic top push flange, and an optional recessed inner stamp on a solid backing plate that embosses internal artwork directly into cookie dough or fondant.

Cookie Cutter Geometry & Recommended Slicer Settings

  • Perimeter Cutting Blade (default 0.9 mm wall × 12 mm height): engineered to print as two solid, gap-free perimeter walls on a standard 0.4 mm nozzle (0.45 mm line width) using the Arachne wall generator;
  • Recessed Inner Stamp (default 8.0 mm height): sits 4 mm lower than the outer blade so internal facial features, lettering, and details press 1.5–2 mm deep into 5.5 mm rolled dough without slicing through the biscuit;
  • Auto-Mirroring for Text: keep Mirror cookie cutter horizontally checked so stamped lettering reads right-side-up on the baked cookie.

Food-Safe 3D Printing Guidelines

Standard PLA softens above 55 °C (130 °F) and must only be hand-washed in lukewarm soapy water—never in a dishwasher. For repeated culinary use, print with certified Food-Safe PLA or PETG (~$24–$28/kg) and a stainless-steel nozzle, coat the print in food-grade epoxy resin, or lay thin kitchen plastic wrap over the dough before pressing.

Frequently Asked Questions (FAQ)

How thick should I roll my cookie dough when using the inner stamp?

With the default 12 mm blade and 8 mm inner stamp, roll your chilled dough to 5–6 mm (about 1/4 inch) thick so the blade cuts cleanly through while the stamp embosses the top surface.

What slicer settings make the strongest 3D printed cookie cutter?

Use a 0.20 mm layer height, enable the Arachne wall generator, set 3–4 wall loops, and use 25% Gyroid infill.

Why is horizontal mirroring enabled by default?

Because the cutter is flipped upside-down when pressed into dough; mirroring the 3D mesh ensures text and asymmetric logos read correctly on the cookie.

☕

Was Arch_ConvertMe helpful?

100% free, private, and ad-free service. If you like it, you can support development by buying me a coffee!

Buy me a coffee